Sri Sakthi Steels

Stainless steel slitting coil mechanical properties, like tensile strength, yield strength, and elongation, vary significantly by grade (e.g., 304, 316, 410) and temper (annealed, half-hard), but generally offer good strength, ductility, and corrosion resistance, with typical values for annealed 304 being around 520 MPa Tensile Strength, 205 MPa Yield Strength, and 40% Elongation, while grades like 316L offer lower yield strength for more formability, and ferritic grades (400 series) provide higher hardness. Common Grade Examples (Annealed/Soft)

• 304 Stainless Steel:
  • Tensile Strength: ~485-520 MPa (70-75 ksi)
  • Yield Strength (0.2% offset): ~170-205 MPa (25-30 ksi)
  • Elongation: ~40% (in 50mm/2")
  • Hardness: ~70-92 HRB
• 304L (Low Carbon):
  • Yield Strength (0.2% offset): ~170 MPa
• 316/316L: Similar to 304 but with Molybdenum, offering better corrosion resistance; 316L is low carbon for weldability.
  • Yield Strength (316L): ~170 MPa
• 410 Stainless Steel (Martensitic): Higher strength, magnetic, less ductile than austenitic grades.
  • Tensile Strength: ~450-510 MPa (65-74 ksi)
  • Yield Strength: ~205-290 MPa (30-42 ksi)
  • Elongation: 20-34%
• 430 Stainless Steel (Ferritic): Good corrosion resistance, magnetic.
  • Tensile Strength: 450-600 MPa
  • Yield Strength (Proof Stress): 260 MPa (Min)
  • Elongation: 20% (Min) 

Key Mechanical Properties

• Tensile Strength (UTS): The maximum stress a material can withstand while being stretched or pulled before breaking (Ultimate Tensile Strength).
• Yield Strength (Proof Strength): The stress at which a material begins to deform plastically (permanently).
• Elongation: Measures ductility, indicating how much the material can stretch before fracturing, usually as a percentage.
• Hardness: Resistance to indentation, measured by scales like Rockwell (HRB). 

Important Considerations

• Temper/Condition: Properties change dramatically with heat treatment (annealed, ½ hard, full hard).
• Grade: Different grades (304, 316, 430, etc.) have different compositions affecting strength and corrosion resistance.
• Application: Properties must match the needs of the end-use (e.g., formability for stamping, strength for structural parts). 

We deals in Tamilnadu Coimbatore, Salem, Erode, Ooty, Thudiyalur, Vadavalli, Kavndampalayam, Periyanayakanpalayam, Karamadai, GN Mills, Perur,  Narasimmanayakanpalayam, Thadagam, Kanuvai, Saibaba colony, Sivananda Colony, Gandhipuram,  Ukkadam, Peelamedu, Avinashi Road , Mettupalaym, Annur, Vilankurichi,  Vellaikinaru, Ganapathy, Saravanampatti, Arasur, Goldwins,  Townhall, Podanur, Chettipalayam Road , Mettualayam Road,  Sathi Road, Pannimadai, Singanallur, Ondipudur, Ramanathapuram, R S Puram, Race Course, and also in Tiruppur , Kangeyam , Dharapuram, Pollachi, Udumalai, Palani, Karur, Dindigul, Ottanchathiram, Valparai, Sathyamangalam, Annur, Puliyampatti, Bhavani, Mettur, Palladam, Mangalam, Kinathukkadavu,  Othhakkal Mandappam, Chennimalai, Perundurai,  Vijayamangalam, Vellakovil, Gobichettipalayam , Kerala District like Kasargod, Kannur, Wayanad, Malapuram, Palakkad, Kozhikode, Thrissur, Ernakulam, Idukki, Kottayam, Alapuzha, Pathanamthitta, Kollam, Thiruvananthapuram , Kodaikanal, Munnar, Calicut, Malappuram, Mannarkkad, Pandalam, Perumnavoor, Thiruvalla, Thrisur, Palakkad, Chittur, Kozhinjampara, Velanthavalam, Navakkarai, Ooty, Gudallore, Nilgiris, Waynad, Bangalore - Karnataka, Mysuru, Andra Pradesh also PAN India supply..