Sri Sakthi Steels

SS 410 rod, also known as a stainless steel 410 round bar, is primarily used in applications where high strength and moderate corrosion resistance are needed, commonly found in parts like pump shafts, valves, gears, cutlery, automotive components, and machinery parts within industries like oil and gas, power generation, and construction due to its ability to withstand high temperatures and pressures while offering good wear resistance. Key applications of SS 410 rods:

• Automotive parts: Exhaust system components, catalytic converter parts, and certain engine components.
• Machinery components: Pump shafts, valve bodies, gears, bearings, and shafts
• Cutlery: Knife blades and other cutting tools
• Oil and gas industry: Pipeline components, drilling equipment, and wellhead fittings
• Power generation: Turbine blades, steam turbine components
• Construction equipment: Components for heavy machinery 

Important points about SS 410 rods:

• Good strength and hardness:This grade of stainless steel is known for its high tensile strength, making it suitable for applications with high stress loads. 
• Moderate corrosion resistance:While not as corrosion resistant as other stainless steel grades like 316, it can withstand moderate corrosive environments. 
• Machinability:SS 410 is considered to be readily machinable. 
• Heat resistance:It can tolerate high temperatures, making it suitable for applications with elevated heat exposure. 

We deals in Coimbatore, Salem, Erode, Ooty, Thudiyalur, Kavndampalayam,  Periyanayakanpalayam, Karamadai,  Narasimmanayakanpalayam, G N mills , Vadavalli, Perur, Thadagam, Kanuvai, Saibaba colony, Sivananda Colony, Gandhipuram,  Ukkadam, Peelamedu, Avinashi Road , Vilankurichi,  Vellaikinaru, Ganapathy, Saravanampatti, Townhall, Podanur, Chettipalayam Road , Mettualayam Road,  Sathi Road, Pannimadai, Singanallur,  Ramanathapuram, R S Puram, Race Course, and also in Tiruppur , Kangeyam , Dharapuram, Pollachi, Udumalai, Palani, Karur, Erode, Salem, Dindigul, Ottanchathiram, Palakkad, Chittur, Kozhinjampara, Velanthavalam, Navakkarai, Ooty, Gudallore, Nilgiris, Waynad, Valparai, Sathyamangalam, Annur, Puliyampatti, Bhavani, Mettur, Palladam, Mangalam, Kinathukkadavu,  Othhakkal Mandappam, Chennimalai, Perundurai,  Vijayamangalam, Vellakovil, Gobichettipalayam, Nearby Coimbatore, TamilNadu, Bengaluru

 

SS 416 stainless steel is a martensitic stainless steel known for its good machinability and ability to be hardened through heat treatment. It's a free-machining grade due to its higher sulfur content, which also affects its corrosion resistance. While it's not as corrosion-resistant as some austenitic stainless steels, its machinability and hardenability make it suitable for various applications. Here's a breakdown of SS 416's characteristics:Key Features:

• Good Machinability:The high sulfur content (0.15% min) in SS 416 allows for fast machining with minimal tool wear. 
• Hardenability:SS 416 can be heat-treated to increase its strength and hardness. 
• Not as Corrosion-Resistant as 300 Series:Its corrosion resistance is not as high as austenitic stainless steels like 304 or 316, but it's still suitable for some applications involving moderate corrosion environments. 
• Martensitic Structure:It's a martensitic stainless steel, meaning it contains a high percentage of chromium (12-13%). 

Chemical Composition (Typical):

• Carbon (C): 0.15% max
• Chromium (Cr): 12-13%
• Nickel (Ni): 0.75% max
• Manganese (Mn): 1.25% max
• Silicon (Si): 1.00% max
• Sulfur (S): 0.15% min
• Phosphorus (P): 0.060% max
• Iron (Fe): Balance 

Applications:Automotive parts, Machine industry, Valves, and Parts requiring high machinability and hardenability. 

SS 410 stainless steel rods exhibit good mechanical properties, including high strength and hardness, and moderate corrosion resistance. Typical mechanical properties include a minimum tensile strength of 480 MPa, a yield strength of 275 MPa, and a minimum elongation of 16%. Hardness can range up to 241 HB. Here's a more detailed look:Tensile Strength: SS 410 rods have a minimum tensile strength of 480 MPa (or 65,000 psi when annealed). This value increases to 205,000 psi when hardened.
Yield Strength: The yield strength (0.2% offset) is typically 275 MPa (or 30,000 psi when annealed). In hardened conditions, it can reach 185,000 psi.
Elongation: The minimum elongation is 16% in an annealed state. In hardened conditions, it can be elongated by 8%.
Hardness: Hardness can be measured using Brinell (HB) scale, with values typically up to 241 HB. In hardened conditions, it can reach Rockwell C40. Other Properties: 

• Density: 0.286 lbm/in³
• Thermal Expansion: 20.5 (min/in)-°F
• Specific Heat: 0.12 BTU/lbm-°F

We deals in Tamilnadu Coimbatore, Salem, Erode, Ooty, Thudiyalur, Kavndampalayam, Periyanayakanpalayam, Karamadai,  Narasimmanayakanpalayam, G N mills , Vadavalli, Perur, Thadagam, Kanuvai, Saibaba colony, Sivananda Colony, Gandhipuram,  Ukkadam, Peelamedu, Avinashi Road , Vilankurichi,  Vellaikinaru, Ganapathy, Saravanampatti, Townhall, Podanur, Chettipalayam Road , Mettualayam Road,  Sathi Road, Pannimadai, Singanallur, Ramanathapuram, R S Puram, Race Course, and also in Tiruppur , Kangeyam , Dharapuram, Pollachi, Udumalai, Palani, Karur, Dindigul, Ottanchathiram, Valparai, Sathyamangalam, Annur, Puliyampatti, Bhavani, Mettur, Palladam, Mangalam, Kinathukkadavu,  Othhakkal Mandappam, Chennimalai, Perundurai,  Vijayamangalam, Vellakovil, Gobichettipalayam , Kerala, Kochi, Kodaikanal, Munnar, Thiruvananthapuram, Kollam, Alappuzha, Kovalam, Kollam, Palakkad, Ernakulam, Kanjikode, Kottayam, Calicut, Malappuram, Mannarkkad, Pandalam, Perumnavoor, Thiruvalla, Thrisur, Palakkad, Chittur, Kozhinjampara, Velanthavalam, Navakkarai, Ooty, Gudallore, Nilgiris, Waynad, Bangalore - Karnataka, Mysuru, Andra Pradesh also PAN India supply..