Sri Sakthi Steels

Stainless steel slitting coil mechanical properties, like tensile strength, yield strength, and elongation, vary significantly by grade (e.g., 304, 316, 410) and temper (annealed, half-hard), but generally offer good strength, ductility, and corrosion resistance, with typical values for annealed 304 being around 520 MPa Tensile Strength, 205 MPa Yield Strength, and 40% Elongation, while grades like 316L offer lower yield strength for more formability, and ferritic grades (400 series) provide higher hardness. Common Grade Examples (Annealed/Soft)

• 304 Stainless Steel:
  • Tensile Strength: ~485-520 MPa (70-75 ksi)
  • Yield Strength (0.2% offset): ~170-205 MPa (25-30 ksi)
  • Elongation: ~40% (in 50mm/2")
  • Hardness: ~70-92 HRB
• 304L (Low Carbon):
  • Yield Strength (0.2% offset): ~170 MPa
• 316/316L: Similar to 304 but with Molybdenum, offering better corrosion resistance; 316L is low carbon for weldability.
  • Yield Strength (316L): ~170 MPa
• 410 Stainless Steel (Martensitic): Higher strength, magnetic, less ductile than austenitic grades.
  • Tensile Strength: ~450-510 MPa (65-74 ksi)
  • Yield Strength: ~205-290 MPa (30-42 ksi)
  • Elongation: 20-34%
• 430 Stainless Steel (Ferritic): Good corrosion resistance, magnetic.
  • Tensile Strength: 450-600 MPa
  • Yield Strength (Proof Stress): 260 MPa (Min)
  • Elongation: 20% (Min) 

Key Mechanical Properties

• Tensile Strength (UTS): The maximum stress a material can withstand while being stretched or pulled before breaking (Ultimate Tensile Strength).
• Yield Strength (Proof Strength): The stress at which a material begins to deform plastically (permanently).
• Elongation: Measures ductility, indicating how much the material can stretch before fracturing, usually as a percentage.
• Hardness: Resistance to indentation, measured by scales like Rockwell (HRB). 

Important Considerations

• Temper/Condition: Properties change dramatically with heat treatment (annealed, ½ hard, full hard).
• Grade: Different grades (304, 316, 430, etc.) have different compositions affecting strength and corrosion resistance.
• Application: Properties must match the needs of the end-use (e.g., formability for stamping, strength for structural parts). 

We deals in Tamilnadu Coimbatore, Salem, Erode, Ooty, Thudiyalur, Vadavalli, Kavndampalayam, Periyanayakanpalayam, Karamadai, GN Mills, Perur,  Narasimmanayakanpalayam, Thadagam, Kanuvai, Saibaba colony, Sivananda Colony, Gandhipuram,  Ukkadam, Peelamedu, Avinashi Road , Mettupalaym, Annur, Vilankurichi,  Vellaikinaru, Ganapathy, Saravanampatti, Arasur, Goldwins,  Townhall, Podanur, Chettipalayam Road , Mettualayam Road,  Sathi Road, Pannimadai, Singanallur, Ondipudur, Ramanathapuram, R S Puram, Race Course, and also in Tiruppur , Kangeyam , Dharapuram, Pollachi, Udumalai, Palani, Karur, Dindigul, Ottanchathiram, Valparai, Sathyamangalam, Annur, Puliyampatti, Bhavani, Mettur, Palladam, Mangalam, Kinathukkadavu,  Othhakkal Mandappam, Chennimalai, Perundurai,  Vijayamangalam, Vellakovil, Gobichettipalayam , Kerala District like Kasargod, Kannur, Wayanad, Malapuram, Palakkad, Kozhikode, Thrissur, Ernakulam, Idukki, Kottayam, Alapuzha, Pathanamthitta, Kollam, Thiruvananthapuram , Kodaikanal, Munnar, Calicut, Malappuram, Mannarkkad, Pandalam, Perumnavoor, Thiruvalla, Thrisur, Palakkad, Chittur, Kozhinjampara, Velanthavalam, Navakkarai, Ooty, Gudallore, Nilgiris, Waynad, Bangalore - Karnataka, Mysuru, Andra Pradesh also PAN India supply..

 

Stainless steel slitting coil mechanical properties, like tensile strength, yield strength, and elongation, vary significantly by grade (e.g., 304, 316, 410) and temper (annealed, half-hard), but generally offer good strength, ductility, and corrosion resistance, with typical values for annealed 304 being around 520 MPa Tensile Strength, 205 MPa Yield Strength, and 40% Elongation, while grades like 316L offer lower yield strength for more formability, and ferritic grades (400 series) provide higher hardness. Common Grade Examples (Annealed/Soft)

• 304 Stainless Steel:
  • Tensile Strength: ~485-520 MPa (70-75 ksi)
  • Yield Strength (0.2% offset): ~170-205 MPa (25-30 ksi)
  • Elongation: ~40% (in 50mm/2")
  • Hardness: ~70-92 HRB
• 304L (Low Carbon):
  • Yield Strength (0.2% offset): ~170 MPa
• 316/316L: Similar to 304 but with Molybdenum, offering better corrosion resistance; 316L is low carbon for weldability.
  • Yield Strength (316L): ~170 MPa
• 410 Stainless Steel (Martensitic): Higher strength, magnetic, less ductile than austenitic grades.
  • Tensile Strength: ~450-510 MPa (65-74 ksi)
  • Yield Strength: ~205-290 MPa (30-42 ksi)
  • Elongation: 20-34%
• 430 Stainless Steel (Ferritic): Good corrosion resistance, magnetic.
  • Tensile Strength: 450-600 MPa
  • Yield Strength (Proof Stress): 260 MPa (Min)
  • Elongation: 20% (Min) 

Key Mechanical Properties

• Tensile Strength (UTS): The maximum stress a material can withstand while being stretched or pulled before breaking (Ultimate Tensile Strength).
• Yield Strength (Proof Strength): The stress at which a material begins to deform plastically (permanently).
• Elongation: Measures ductility, indicating how much the material can stretch before fracturing, usually as a percentage.
• Hardness: Resistance to indentation, measured by scales like Rockwell (HRB). 

Important Considerations

• Temper/Condition: Properties change dramatically with heat treatment (annealed, ½ hard, full hard).
• Grade: Different grades (304, 316, 430, etc.) have different compositions affecting strength and corrosion resistance.
• Application: Properties must match the needs of the end-use (e.g., formability for stamping, strength for structural parts). 

We deals in Tamilnadu Coimbatore, Salem, Erode, Ooty, Thudiyalur, Vadavalli, Kavndampalayam, Periyanayakanpalayam, Karamadai, GN Mills, Perur,  Narasimmanayakanpalayam, Thadagam, Kanuvai, Saibaba colony, Sivananda Colony, Gandhipuram,  Ukkadam, Peelamedu, Avinashi Road , Mettupalaym, Annur, Vilankurichi,  Vellaikinaru, Ganapathy, Saravanampatti, Arasur, Goldwins,  Townhall, Podanur, Chettipalayam Road , Mettualayam Road,  Sathi Road, Pannimadai, Singanallur, Ondipudur, Ramanathapuram, R S Puram, Race Course, and also in Tiruppur , Kangeyam , Dharapuram, Pollachi, Udumalai, Palani, Karur, Dindigul, Ottanchathiram, Valparai, Sathyamangalam, Annur, Puliyampatti, Bhavani, Mettur, Palladam, Mangalam, Kinathukkadavu,  Othhakkal Mandappam, Chennimalai, Perundurai,  Vijayamangalam, Vellakovil, Gobichettipalayam , Kerala District like Kasargod, Kannur, Wayanad, Malapuram, Palakkad, Kozhikode, Thrissur, Ernakulam, Idukki, Kottayam, Alapuzha, Pathanamthitta, Kollam, Thiruvananthapuram , Kodaikanal, Munnar, Calicut, Malappuram, Mannarkkad, Pandalam, Perumnavoor, Thiruvalla, Thrisur, Palakkad, Chittur, Kozhinjampara, Velanthavalam, Navakkarai, Ooty, Gudallore, Nilgiris, Waynad, Bangalore - Karnataka, Mysuru, Andra Pradesh also PAN India supply..

 

JSW carbon steel rods offer excellent mechanical properties like high tensile strength, good elongation, and enhanced durability, achieved through consistent chemistry (low Sulfur/Phosphorus) and advanced manufacturing, catering to applications from general engineering to springs and welding, with specific grades like HC72A showing high carbon content (around 0.7%) for demanding uses. Key properties include precise dimensional accuracy, superior surface finish, and consistency, with grades varying in carbon levels to suit requirements like easy weldability (low carbon) or high strength. General Mechanical Properties

• Strength: High tensile strength (varies by grade) for durability and load-bearing capacity, with some TMT bar grades reaching 550 N/mm² yield strength.
• Elongation: Good ductility, important for bending and forming applications.
• Fatigue Resistance: High fatigue resistance for cyclic loading. 

Key Features & Advantages

• Consistent Quality: Uniform microstructure and properties due to advanced mills and process controls.
• Low Impurities: Low Sulfur and Phosphorus content (0.005%-0.035%) for better mechanical performance and weldability.
• Dimensional Accuracy: Guaranteed by automated control systems, ensuring consistent size.
• Versatility: Available in various grades (High, Medium, Low Carbon) for diverse applications. 

Example Grade: HC72A (High Carbon)

• Carbon: 0.7 - 0.75%.
• Manganese: 0.3 - 0.6%.
• Applications: Suitable for wire ropes, tools, springs, and heat treatment. 

Applications

• Automobile Industry
• General Engineering
• Welding
• Springs
• Cold Drawing & Forming 

For specific project requirements, you'd choose a grade (like HC72A or other specified grades) that balances strength, ductility, and weldability, with JSW providing options from general purpose to specialized high-performance rods. 

We deals in Tamilnadu Coimbatore, Salem, Erode, Ooty, Thudiyalur, Vadavalli, Kavndampalayam, Periyanayakanpalayam, Karamadai, GN Mills, Perur,  Narasimmanayakanpalayam, Thadagam, Kanuvai, Saibaba colony, Sivananda Colony, Gandhipuram,  Ukkadam, Peelamedu, Avinashi Road , Mettupalaym, Annur, Vilankurichi,  Vellaikinaru, Ganapathy, Saravanampatti, Arasur, Goldwins,  Townhall, Podanur, Chettipalayam Road , Mettualayam Road,  Sathi Road, Pannimadai, Singanallur, Ondipudur, Ramanathapuram, R S Puram, Race Course, and also in Tiruppur , Kangeyam , Dharapuram, Pollachi, Udumalai, Palani, Karur, Dindigul, Ottanchathiram, Valparai, Sathyamangalam, Annur, Puliyampatti, Bhavani, Mettur, Palladam, Mangalam, Kinathukkadavu,  Othhakkal Mandappam, Chennimalai, Perundurai,  Vijayamangalam, Vellakovil, Gobichettipalayam , Kerala District like Kasargod, Kannur, Wayanad, Malapuram, Palakkad, Kozhikode, Thrissur, Ernakulam, Idukki, Kottayam, Alapuzha, Pathanamthitta, Kollam, Thiruvananthapuram , Kodaikanal, Munnar, Calicut, Malappuram, Mannarkkad, Pandalam, Perumnavoor, Thiruvalla, Thrisur, Palakkad, Chittur, Kozhinjampara, Velanthavalam, Navakkarai, Ooty, Gudallore, Nilgiris, Waynad, Bangalore - Karnataka, Mysuru, Andra Pradesh also PAN India supply.. 

MN12 (12-14% Mn) manganese steel plate, also known as Hadfield steel, is a fully austenitic steel designed for extreme wear resistance and work-hardening, with a tensile strength of over , initial surface hardness of , and work-hardened hardness up to . It excels under heavy impact and abrasion, making it ideal for crusher liners and mining equipment. Key Mechanical Properties of MN12 Steel Plate

• Work Hardening: The standout feature is its ability to harden from an initial  (Brinell) up to  on the surface under impact or abrasive pressure.
• Tensile Strength: Typically ranges between  and .
• Yield Strength: Generally in the range of .
• Toughness: Extremely high toughness with significant ductility, preventing cracking under severe shock loads.
• Elongation: High ductility with roughly  elongation.
• Magnetic Behavior: Non-magnetic

Key Features and Applications

• High Wear Resistance: Designed to withstand severe abrasion.
• Work Hardening: Becomes tougher and harder as it is deformed.
• Typical Applications: Used in mining, construction, and quarrying, such as crushers, feeders, conveyors, power shovels, and rail components.
• Machinability: Moderate (difficult to cut; usually requires plasma or abrasive cutting)

We deals in Tamilnadu Coimbatore, Salem, Erode, Ooty, Thudiyalur, Vadavalli, Kavndampalayam, Periyanayakanpalayam, Karamadai, GN Mills, Perur,  Narasimmanayakanpalayam, Thadagam, Kanuvai, Saibaba colony, Sivananda Colony, Gandhipuram,  Ukkadam, Peelamedu, Avinashi Road , Mettupalaym, Annur, Vilankurichi,  Vellaikinaru, Ganapathy, Saravanampatti, Arasur, Goldwins,  Townhall, Podanur, Chettipalayam Road , Mettualayam Road,  Sathi Road, Pannimadai, Singanallur, Ondipudur, Ramanathapuram, R S Puram, Race Course, and also in Tiruppur , Kangeyam , Dharapuram, Pollachi, Udumalai, Palani, Karur, Dindigul, Ottanchathiram, Valparai, Sathyamangalam, Annur, Puliyampatti, Bhavani, Mettur, Palladam, Mangalam, Kinathukkadavu,  Othhakkal Mandappam, Chennimalai, Perundurai,  Vijayamangalam, Vellakovil, Gobichettipalayam , Kerala District like Kasargod, Kannur, Wayanad, Malapuram, Palakkad, Kozhikode, Thrissur, Ernakulam, Idukki, Kottayam, Alapuzha, Pathanamthitta, Kollam, Thiruvananthapuram , Kodaikanal, Munnar, Calicut, Malappuram, Mannarkkad, Pandalam, Perumnavoor, Thiruvalla, Thrisur, Palakkad, Chittur, Kozhinjampara, Velanthavalam, Navakkarai, Ooty, Gudallore, Nilgiris, Waynad, Bangalore - Karnataka, Mysuru, Andra Pradesh also PAN India supply..

 

NM 400 is a high-strength, abrasion-resistant steel plate with a nominal hardness of 400 Brinell 360-430, widely used for its superior toughness and wear resistance in mining and construction machinery. It is a Chinese GB standard steel, often serving as a cost-effective alternative to Hardox 400/Abrex 400.

Key Characteristics

• Wear Resistance: 3-5 times more wear-resistant than ordinary low-alloy steel.
• Hardness: Typically 360 to 440 providing excellent resistance to sliding abrasion.
• Performance: Offers good welding, cold-bending, and cutting properties for fabrication.
• Composition: Low-alloy, high-strength carbon steel

 

Common Applications

• Mining & Quarrying: Dump truck beds, loader buckets, and chutes.
• Construction: Excavator buckets, blade edges, and structural components.
• Industrial: Conveyor systems, crushing equipment, and cement machinery

 

Processing and Availability

• Cutting: Recommended to use cold cutting (plasma or waterjet) to maintain hardness, as heating above 300can reduce wear resistance.
• Thickness Range: Commonly available in thicknesses ranging from 3 mm to 100 mm

 

We deals in Tamilnadu Coimbatore, Salem, Erode, Ooty, Thudiyalur, Vadavalli, Kavndampalayam, Periyanayakanpalayam, Karamadai, GN Mills, Perur,  Narasimmanayakanpalayam, Thadagam, Kanuvai, Saibaba colony, Sivananda Colony, Gandhipuram,  Ukkadam, Peelamedu, Avinashi Road , Mettupalaym, Annur, Vilankurichi,  Vellaikinaru, Ganapathy, Saravanampatti, Arasur, Goldwins,  Townhall, Podanur, Chettipalayam Road , Mettualayam Road,  Sathi Road, Pannimadai, Singanallur, Ondipudur, Ramanathapuram, R S Puram, Race Course, and also in Tiruppur , Kangeyam , Dharapuram, Pollachi, Udumalai, Palani, Karur, Dindigul, Ottanchathiram, Valparai, Sathyamangalam, Annur, Puliyampatti, Bhavani, Mettur, Palladam, Mangalam, Kinathukkadavu,  Othhakkal Mandappam, Chennimalai, Perundurai,  Vijayamangalam, Vellakovil, Gobichettipalayam , Kerala District like Kasargod, Kannur, Wayanad, Malapuram, Palakkad, Kozhikode, Thrissur, Ernakulam, Idukki, Kottayam, Alapuzha, Pathanamthitta, Kollam, Thiruvananthapuram , Kodaikanal, Munnar, Calicut, Malappuram, Mannarkkad, Pandalam, Perumnavoor, Thiruvalla, Thrisur, Palakkad, Chittur, Kozhinjampara, Velanthavalam, Navakkarai, Ooty, Gudallore, Nilgiris, Waynad, Bangalore - Karnataka, Mysuru, Andra Pradesh also PAN India supply..

Titanium rods offer a superior strength-to-weight ratio, exceptional corrosion resistance, and high-temperature performance, making them ideal for aerospace and medical applications. They are roughly 40-50% lighter than stainless steel, with Grade 5 (Ti-6Al-4V) providing high tensile strengths up to 950-1200 MPa. Key Mechanical Properties of Titanium Rods (Grades 2 & 5)

• Density: ~4.51 g/cm³ (45% lighter than steel).
• Tensile Strength: Commercially Pure (CP) Grade 2: 352–450 MPa; Alloy Grade 5: ~950–1200 MPa.
• Yield Strength: CP Grade 2: 275 MPa; Alloy Grade 5: ~880–1100 MPa.
• Hardness: Rockwell C36 (Grade 5), Rockell B70 (Grade 2).
• Elastic Modulus: ~105-116 GPa (more flexible than steel).
• Melting Point: ~1668°C (3034°F). 

Comparison with Stainless Steel Rods (e.g., 316Ti)

• Weight: Stainless steel is much heavier (density ~8.0 g/cm³).
• Strength: While high-strength stainless steels are strong, titanium alloys generally offer better strength-to-weight ratios and higher heat resistance.
• Corrosion: Titanium has superior resistance to corrosion, especially in saltwater.
• Properties of 316Ti (1.4571): Tensile strength 500-700 N/mm², density 8.0 kg/dm³. 

Key Advantages

• Biocompatibility: Ideal for medical implants.
• Fatigue Resistance: High, suitable for repetitive stress.
• Low Thermal Conductivity: Provides better high-temperature performance. 

We deals in Tamilnadu Coimbatore, Salem, Erode, Ooty, Thudiyalur, Vadavalli, Kavndampalayam, Periyanayakanpalayam, Karamadai, GN Mills, Perur,  Narasimmanayakanpalayam, Thadagam, Kanuvai, Saibaba colony, Sivananda Colony, Gandhipuram,  Ukkadam, Peelamedu, Avinashi Road , Mettupalaym, Annur, Vilankurichi,  Vellaikinaru, Ganapathy, Saravanampatti, Arasur, Goldwins,  Townhall, Podanur, Chettipalayam Road , Mettualayam Road,  Sathi Road, Pannimadai, Singanallur, Ondipudur, Ramanathapuram, R S Puram, Race Course, and also in Tiruppur , Kangeyam , Dharapuram, Pollachi, Udumalai, Palani, Karur, Dindigul, Ottanchathiram, Valparai, Sathyamangalam, Annur, Puliyampatti, Bhavani, Mettur, Palladam, Mangalam, Kinathukkadavu,  Othhakkal Mandappam, Chennimalai, Perundurai,  Vijayamangalam, Vellakovil, Gobichettipalayam , Kerala District like Kasargod, Kannur, Wayanad, Malapuram, Palakkad, Kozhikode, Thrissur, Ernakulam, Idukki, Kottayam, Alapuzha, Pathanamthitta, Kollam, Thiruvananthapuram , Kodaikanal, Munnar, Calicut, Malappuram, Mannarkkad, Pandalam, Perumnavoor, Thiruvalla, Thrisur, Palakkad, Chittur, Kozhinjampara, Velanthavalam, Navakkarai, Ooty, Gudallore, Nilgiris, Waynad, Bangalore - Karnataka, Mysuru, Andra Pradesh also PAN India supply..