Sri Sakthi Steels

EN8 plate is a medium carbon steel that is used in a variety of engineering applications. It is also known as SAE 1045, AISI 1045, and C45 steel. Uses of EN8 plate Axles, Bolts, Connecting rods, Crankshafts, Gears, Guide rods, Rollers, Shafts, Spindles, and Studs.Properties of EN8 plate ..

High strength

Good machinability

Good weldability

Moderate wear resistance

Can be surface hardened by carburizing, cyaniding, or nitriding

Can be machined in all states, either annealed or normalized

We deals in Coimbatore, Salem, Erode, Ooty, Karur, Theni, Kerala, Mysuru, Karnataka, Udupi, Bengaluru, Silk board, White field, Vellore, Madurai , Kochi, Thrissuri, Thanjavur, Thoothukudi, Tiruchendure, Dindigul, Thudiyalur, Kavundampalayam,  Periyanayakanpalayam,  Bellari, Hubballi , Karamadai,  Narasimmanayakanpalayam, G N mills , Vadavalli, Perur, Thadagam, Kanuvai, Saibaba colony, Sivananda Colony, Gandhipuram,  Ukkadam, Peelamedu, Avinashi Road , Vilankurichi,  Vellaikinaru, Ganapathy, Saravanampatti, Townhall, Poodanur, Chettipalayam Road , Mettualayam Road,  Sathi Road, Mysuru,Mudumalai,  Salem , Pannimadai, Singanallur,  Ramanathapuram, Kalapatti, RS Puram, Race Course, and also in Tiruppur , Kangeyam , Dharapuram, Pollachi, Udumalai, Palani, Karur, Erode, Salem, Dindigul, Pollachi, Udumalpet, Ottanchathiram, Palakkad, Chittur, Kozhinjampara, Velanthavalam, Navakkarai, Ooty, coonoor,Kotagiri,  Gudallore, Palani, Theni, Nilgiris, Waynad, Valparai, Sathyamangalam, Annur, Puliyampatti, Bhavani, Mettur, Palladam, Mangalam, Kinathukkadavu,  Othhakkal Mandappam, Chennimalai, Perundurai,  Vijayamangalam, Vellakovil, karanampettai, Gobichettipalayam, Nearby Coimbatore, TamilNadu, Bengaluru, Kerala,Thrissure,Palakkad,  Karur, Andra Pradesh all states. 

SAE 8620 alloy steel is a low nickel, chromium-molybdenum steel that's used in a variety of applications: 

• Machinery parts: SAE 8620 is used in gears, crankshafts, shafts, axles, bushings, heavy-duty pins, bolts, springs, and hand tools. 
• Automotive: SAE 8620 is used in differentials. 
• Other industries: SAE 8620 is used in the shipbuilding, aircraft, mechanical engineering, oil, and iron and steel industries. 

SAE 8620 is also known as case hardening steel because it's often carburized to create a case-hardened part. This process results in good wear characteristics. SAE 8620 is characterized by its high strength, toughness, and hardness. It's also known for its good core strength and toughness when carburized, hardened, and tempered. 

We deals in Tamilnadu Coimbatore, Salem, Erode, Ooty, Thudiyalur, Kavndampalayam, Periyanayakanpalayam, Karamadai,  Narasimmanayakanpalayam, G N mills , Vadavalli, Perur, Thadagam, Kanuvai, Saibaba colony, Sivananda Colony, Gandhipuram,  Ukkadam, Peelamedu, Avinashi Road , Vilankurichi,  Vellaikinaru, Ganapathy, Saravanampatti, Townhall, Podanur, Chettipalayam Road , Mettualayam Road,  Sathi Road, Pannimadai, Singanallur, Ramanathapuram, R S Puram, Race Course, and also in Tiruppur , Kangeyam , Dharapuram, Pollachi, Udumalai, Palani, Karur, Dindigul, Ottanchathiram, Valparai, Sathyamangalam, Annur, Puliyampatti, Bhavani, Mettur, Palladam, Mangalam, Kinathukkadavu,  Othhakkal Mandappam, Chennimalai, Perundurai,  Vijayamangalam, Vellakovil, Gobichettipalayam , Kerala, Kochi, Kodaikanal, Munnar, Thiruvananthapuram, Kollam, Alappuzha, Kovalam, Kollam, Palakkad, Ernakulam, Kanjikode, Kottayam, Calicut, Malappuram, Mannarkkad, Pandalam, Perumnavoor, Thiruvalla, Thrisur, Palakkad, Chittur, Kozhinjampara, Velanthavalam, Navakkarai, Ooty, Gudallore, Nilgiris, Waynad, Bangalore - Karnataka, Mysuru, Andra Pradesh also PAN India supply.. 

MS (Mild Steel) bright bars are widely used in various industries for their precision, durability, and ease of machining. They are commonly used in automotive, construction, machinery, and other manufacturing sectors. Their precise dimensions and smooth finish make them ideal for applications requiring high accuracy and good surface finishes. Specific applications of MS bright bars include:

• Automotive: Used in engine components, axles, and other parts requiring high strength and precise dimensions. 
• Construction and Infrastructure: Used in structural elements, reinforcement, and as a base material for various components. 
• Machinery and Equipment: Used in shafts, gears, bearings, and other mechanical parts. 
• Tool and Fastener Manufacturing: Used in making tools, fasteners, and other precision components. 
• Furniture and Interior Design: Used for decorative elements, architectural fittings, and other applications where a smooth, polished finish is desired. 
• Other industries: Used in food processing, oil and gas, and mining industries. 

We deals in Tamilnadu Coimbatore, Salem, Erode, Ooty, Thudiyalur, Kavndampalayam, Periyanayakanpalayam, Karamadai,  Narasimmanayakanpalayam, G N mills , Vadavalli, Perur, Thadagam, Kanuvai, Saibaba colony, Sivananda Colony, Gandhipuram,  Ukkadam, Peelamedu, Avinashi Road , Vilankurichi,  Vellaikinaru, Ganapathy, Saravanampatti, Townhall, Podanur, Chettipalayam Road , Mettualayam Road,  Sathi Road, Pannimadai, Singanallur, Ramanathapuram, R S Puram, Race Course, and also in Tiruppur , Kangeyam , Dharapuram, Pollachi, Udumalai, Palani, Karur, Dindigul, Ottanchathiram, Valparai, Sathyamangalam, Annur, Puliyampatti, Bhavani, Mettur, Palladam, Mangalam, Kinathukkadavu,  Othhakkal Mandappam, Chennimalai, Perundurai,  Vijayamangalam, Vellakovil, Gobichettipalayam , Kerala, Kochi, Kodaikanal, Munnar, Thiruvananthapuram, Kollam, Alappuzha, Kovalam, Kollam, Palakkad, Ernakulam, Kanjikode, Kottayam, Calicut, Malappuram, Mannarkkad, Pandalam, Perumnavoor, Thiruvalla, Thrisur, Palakkad, Chittur, Kozhinjampara, Velanthavalam, Navakkarai, Ooty, Gudallore, Nilgiris, Waynad, Bangalore - Karnataka, Mysuru, Andra Pradesh also PAN India supply..

Mild steel, also known as low-carbon steel, is primarily composed of iron and carbon, with small amounts of other elements like manganese, silicon, and phosphorus. The carbon content in mild steel typically ranges from 0.05% to 0.25%. Specific chemical composition details can vary depending on the grade and manufacturer, but a general composition is provided in the search results. Here's a more detailed look at the chemical composition of mild steel:Key Elements and Typical Ranges:

• Carbon (C): 0.05% to 0.25%.
• Manganese (Mn): Up to 1.0%.
• Silicon (Si): Up to 0.60%.
• Phosphorus (P): Up to 0.045%.
• Sulfur (S): Up to 0.045%.
• Iron (Fe): Balance.
• Other Elements: Depending on the grade and manufacturer, other elements like copper, nickel, and chromium may be present in trace amounts. 

Important Considerations:

• Grade Variations:The specific chemical composition can vary between different grades of mild steel, and the SAIL website and Shrenik Steels website mention different grades and their corresponding chemical compositions. 
• Incidental Elements:Elements not intentionally added for specific properties can be present in minor amounts, but they should be controlled to avoid affecting the steel's properties. 
• Silicon Content:When silicon is used as a deoxidizer or alloying element, it can be present in varying amounts. 
• Copper:Copper may be added to enhance corrosion resistance and may be present in certain grades. 
• Micro-alloying Elements:Elements like niobium (Nb), vanadium (V), and titanium (Ti) may be added in small amounts to enhance mechanical properties. 

Cr12MoV round bars are known for their high wear resistance, hardenability, and toughness, making them suitable for various cold work tooling applications. They also offer good thermal stability, compressive strength, and resistance to deformation. The material is a cold work tool steel, developed from Cr12 steel, with improved properties due to the addition of molybdenum and vanadium. Key Properties:

• High Hardness:Cr12MoV achieves high hardness after quenching and tempering, typically in the range of 58-62 HRC. 
• Excellent Wear Resistance:The high chromium and molybdenum content contribute to its exceptional wear resistance, crucial for applications involving friction and abrasion. 
• Good Hardenability:Cr12MoV has good hardenability, meaning it can be hardened throughout its cross-section with appropriate heat treatment. 
• Toughness:While it's a hard steel, Cr12MoV also exhibits good toughness, allowing it to withstand impacts and stresses without fracturing. 
• Thermal Stability:It maintains its properties at elevated temperatures, making it suitable for applications with thermal cycling. 
• Compressive Strength:Cr12MoV has good compressive strength, enabling it to withstand high loads and pressures. 
• Minimal Distortion:Quenching and tempering Cr12MoV results in minimal dimensional changes, which is important for precision tooling. 

Chemical Composition:

• Carbon (C): 1.45-1.70%
• Silicon (Si): ≤0.40%
• Manganese (Mn): ≤0.40%
• Chromium (Cr): 11.00-12.50%
• Molybdenum (Mo): 0.40-0.70%
• Vanadium (V): Added for enhanced properties 

Applications:Cr12MoV round bars are widely used in the manufacturing of various cold work tools, including: 

• Punching dies with complex shapes
• Inserts on complex dies
• Steel deep drawing dies
• Wire drawing dies
• Threaded wire plates
• Cold extrusion dies
• Cold cutting scissors
• Circular saws
• Standard tools
• Measuring tools

Heat Treatment:

• Spheroidizing Annealing: 860°C for 2 hours, furnace cooled to 750°C, then cooled to 500-550°C.
• Quenching and Tempering: 1100°C for 20 minutes with step quenching, followed by 700°C for 1 hour tempering.
• Quenching: 1030°C for 40 minutes with oil quenching (800°C preheating, vacuum 2.5 pa).
• Tempering: 250°C for 1 hour. 

Cr12MoV is a ledeburite cold work tool steel known for its high hardenability, hardness, wear resistance, and relatively small heat treatment distortion. It's used in manufacturing cold molds under heavy loads, for bulk production, and in complex shapes. The steel is an upgraded version of Cr12 steel, with added Mo, V, and reduced C content. Key Properties:

• Chemical Composition: (Typical values, may vary) 
  • Carbon (C): 1.45-1.70%
  • Silicon (Si): ≤0.40%
  • Manganese (Mn): ≤0.40%
  • Phosphorus (P): ≤0.030%
  • Sulfur (S): ≤0.030%
  • Chromium (Cr): 11.00-12.50%
  • Molybdenum (Mo): 0.40-0.60%
  • Vanadium (V): 0.15-0.30%
• Mechanical Properties:
  • Hardness:
    • Annealed: 255~207 HB (Indentation diameter of 3.8~4.2mm) 
    • Quenched: 58 HRC 
  • Yield Strength: ≥ 154 MPa 
  • Tensile Strength: ≥ 485 MPa 
• Applications:
  • Dies for punching, trimming, and deep drawing 
  • Thread rolling dies 
  • Circular saws 
  • Various types of molds and tools 
  • Parts requiring high wear resistance and strength 
• Heat Treatment: Cr12MoV is typically hardened and tempered to achieve desired properties. 
• Equivalent Grades: Cr12MoV is equivalent to DIN 1.2379, AISI D2, JIS SKD11, and grade K110. 
• Manufacturing: Can be supplied in various forms like round bar, flat bar, plate, and block. 

We deals in Tamilnadu Coimbatore, Salem, Erode, Ooty, Thudiyalur, Kavndampalayam, Periyanayakanpalayam, Karamadai,  Narasimmanayakanpalayam, G N mills , Vadavalli, Perur, Thadagam, Kanuvai, Saibaba colony, Sivananda Colony, Gandhipuram,  Ukkadam, Peelamedu, Avinashi Road , Vilankurichi,  Vellaikinaru, Ganapathy, Saravanampatti, Townhall, Podanur, Chettipalayam Road , Mettualayam Road,  Sathi Road, Pannimadai, Singanallur, Ramanathapuram, R S Puram, Race Course, and also in Tiruppur , Kangeyam , Dharapuram, Pollachi, Udumalai, Palani, Karur, Dindigul, Ottanchathiram, Valparai, Sathyamangalam, Annur, Puliyampatti, Bhavani, Mettur, Palladam, Mangalam, Kinathukkadavu,  Othhakkal Mandappam, Chennimalai, Perundurai,  Vijayamangalam, Vellakovil, Gobichettipalayam , Kerala, Kochi, Kodaikanal, Munnar, Thiruvananthapuram, Kollam, Alappuzha, Kovalam, Kollam, Palakkad, Ernakulam, Kanjikode, Kottayam, Calicut, Malappuram, Mannarkkad, Pandalam, Perumnavoor, Thiruvalla, Thrisur, Palakkad, Chittur, Kozhinjampara, Velanthavalam, Navakkarai, Ooty, Gudallore, Nilgiris, Waynad, Bangalore - Karnataka, Mysuru, Andra Pradesh also PAN India supply.. 

Steel round bars are characterized by a range of mechanical properties, including tensile strength, yield strength, hardness, ductility, and toughness. They are also known for their corrosion resistance, weldability, and fatigue resistance. The specific properties vary depending on the type of steel, such as mild steel, tool steel, or stainless steel. Key Properties of Steel Round Bars:

• Tensile Strength:The maximum stress a material can withstand while being stretched or pulled before breaking. For example, A36 steel has a tensile strength ranging from 58,000 to 79,800 psi. 
• Yield Strength:The point at which a material begins to deform permanently. A36 steel has a yield strength of 36,000 psi. 
• Hardness:A measure of a material's resistance to localized plastic deformation, typically by indentation. 
• Ductility:The ability of a material to be deformed under tensile stress without fracturing. 
• Toughness:A material's ability to absorb energy and plastically deform before fracturing. 
• Corrosion Resistance:The ability of a material to withstand corrosive environments, such as those containing moisture or chemicals. Stainless steel round bars are particularly known for their rust resistance. 
• Weldability:The ease with which a material can be welded without causing defects. 
• Fatigue Resistance:A material's ability to withstand cyclic loading (repeated stress) without failure. 

Common Types of Steel Round Bars:

• Mild Steel: Known for good malleability and high tensile strength. 
• Tool Steel: Possesses high hardness and wear resistance, making it suitable for tools and machinery. 
• Stainless Steel: Exhibits excellent corrosion resistance and durability. 
• Alloy Steel (e.g., SAE 4140): Offers high strength, corrosion resistance, and wear resistance. 

We deals in Tamilnadu Coimbatore, Salem, Erode, Ooty, Thudiyalur, Kavndampalayam, Periyanayakanpalayam, Karamadai,  Narasimmanayakanpalayam, G N mills , Vadavalli, Perur, Thadagam, Kanuvai, Saibaba colony, Sivananda Colony, Gandhipuram,  Ukkadam, Peelamedu, Avinashi Road , Vilankurichi,  Vellaikinaru, Ganapathy, Saravanampatti, Townhall, Podanur, Chettipalayam Road , Mettualayam Road,  Sathi Road, Pannimadai, Singanallur, Ramanathapuram, R S Puram, Race Course, and also in Tiruppur , Kangeyam , Dharapuram, Pollachi, Udumalai, Palani, Karur, Dindigul, Ottanchathiram, Valparai, Sathyamangalam, Annur, Puliyampatti, Bhavani, Mettur, Palladam, Mangalam, Kinathukkadavu,  Othhakkal Mandappam, Chennimalai, Perundurai,  Vijayamangalam, Vellakovil, Gobichettipalayam , Kerala, Kochi, Kodaikanal, Munnar, Thiruvananthapuram, Kollam, Alappuzha, Kovalam, Kollam, Palakkad, Ernakulam, Kanjikode, Kottayam, Calicut, Malappuram, Mannarkkad, Pandalam, Perumnavoor, Thiruvalla, Thrisur, Palakkad, Chittur, Kozhinjampara, Velanthavalam, Navakkarai, Ooty, Gudallore, Nilgiris, Waynad, Bangalore - Karnataka, Mysuru, Andra Pradesh also PAN India supply..

 

EN24 steel round bars are characterized by high tensile strength, hardness, and good machinability. Their mechanical properties can vary depending on the heat treatment condition (T or Z), affecting tensile strength and yield strength. EN24 also exhibits good ductility and impact resistance, along with excellent wear resistance. Here's a more detailed look at the properties:Mechanical Properties:

• Tensile Strength: EN24T can achieve strengths of 850-1000 MPa, while the Z condition can reach up to 1550 MPa. 
• Yield Strength: Typically around 635 MPa. 
• Hardness: EN24 can reach a hardness of 248-302 HB. 
• Impact Toughness: Good impact toughness. 
• Wear Resistance: EN24 exhibits excellent wear resistance, making it suitable for applications where wear is a concern. 
• Machinability: EN24 is readily machinable, especially in the T condition. 

Heat Treatment:

• EN24 is a through-hardening alloy steel, meaning it can be heat-treated to achieve a wide range of mechanical properties. 
• The T condition (temper) generally results in higher ductility and machinability, while the Z condition (hardness) provides higher strength. 
• Heat treatment can significantly impact the tensile strength, yield strength, and hardness of EN24. 

Applications:

• EN24 is commonly used in automotive, aerospace, and high-strength machine parts applications. 
• Its high tensile strength, hardness, and wear resistance make it suitable for components that require durability and resistance to wear. 

We deals in Tamilnadu Coimbatore, Salem, Erode, Ooty, Thudiyalur, Kavndampalayam, Periyanayakanpalayam, Karamadai,  Narasimmanayakanpalayam, G N mills , Vadavalli, Perur, Thadagam, Kanuvai, Saibaba colony, Sivananda Colony, Gandhipuram,  Ukkadam, Peelamedu, Avinashi Road , Vilankurichi,  Vellaikinaru, Ganapathy, Saravanampatti, Townhall, Podanur, Chettipalayam Road , Mettualayam Road,  Sathi Road, Pannimadai, Singanallur, Ramanathapuram, R S Puram, Race Course, and also in Tiruppur , Kangeyam , Dharapuram, Pollachi, Udumalai, Palani, Karur, Dindigul, Ottanchathiram, Valparai, Sathyamangalam, Annur, Puliyampatti, Bhavani, Mettur, Palladam, Mangalam, Kinathukkadavu,  Othhakkal Mandappam, Chennimalai, Perundurai,  Vijayamangalam, Vellakovil, Gobichettipalayam , Kerala, Kochi, Kodaikanal, Munnar, Thiruvananthapuram, Kollam, Alappuzha, Kovalam, Kollam, Palakkad, Ernakulam, Kanjikode, Kottayam, Calicut, Malappuram, Mannarkkad, Pandalam, Perumnavoor, Thiruvalla, Thrisur, Palakkad, Chittur, Kozhinjampara, Velanthavalam, Navakkarai, Ooty, Gudallore, Nilgiris, Waynad, Bangalore - Karnataka, Mysuru, Andra Pradesh also PAN India supply..

 

EN41B steel round bars are high-quality, chromium-aluminum-molybdenum alloy steel products, primarily used for components requiring exceptional surface hardness, wear resistance, and toughness, achieved through nitriding. They are crucial in automotive, aerospace, and general engineering for producing gears, crankshafts, camshafts, and cylinder liners. Key Uses and Applications

• Automotive Components: Connecting rods, crankshafts, gudgeon pins, and steering components.
• Engineering/Machinery: Gears, pinions, spindles, and shafts.
• Nitrided Parts: Hydraulic cylinders, valve stems, and injection molding machinery components (e.g., screws and barrels).
• Tools and Dies: Components needing high wear resistance like brick press plates and clutch plates. 

Key Properties

• Nitriding Capability: Surfaces can be hardened up to 65–70 HRC.
• Strength & Durability: Retains high fatigue resistance and core strength.
• Performance: Designed for high abrasion resistance and long-lasting performance. 

EN41B is typically supplied in the annealed condition to allow for machining before the final,, surface-hardening nitriding process. 

We deals in Tamilnadu Coimbatore, Salem, Erode, Ooty, Thudiyalur, Vadavalli, Kavndampalayam, Periyanayakanpalayam, Karamadai, GN Mills, Perur,  Narasimmanayakanpalayam, Thadagam, Kanuvai, Saibaba colony, Sivananda Colony, Gandhipuram,  Ukkadam, Peelamedu, Avinashi Road , Mettupalaym, Annur, Vilankurichi,  Vellaikinaru, Ganapathy, Saravanampatti, Arasur, Goldwins,  Townhall, Podanur, Chettipalayam Road , Mettualayam Road,  Sathi Road, Pannimadai, Singanallur, Ondipudur, Ramanathapuram, R S Puram, Race Course, and also in Tiruppur , Kangeyam , Dharapuram, Pollachi, Udumalai, Palani, Karur, Dindigul, Ottanchathiram, Valparai, Sathyamangalam, Annur, Puliyampatti, Bhavani, Mettur, Palladam, Mangalam, Kinathukkadavu,  Othhakkal Mandappam, Chennimalai, Perundurai,  Vijayamangalam, Vellakovil, Gobichettipalayam , Kerala District like Kasargod, Kannur, Wayanad, Malapuram, Palakkad, Kozhikode, Thrissur, Ernakulam, Idukki, Kottayam, Alapuzha, Pathanamthitta, Kollam, Thiruvananthapuram , Kodaikanal, Munnar, Calicut, Malappuram, Mannarkkad, Pandalam, Perumnavoor, Thiruvalla, Thrisur, Palakkad, Chittur, Kozhinjampara, Velanthavalam, Navakkarai, Ooty, Gudallore, Nilgiris, Waynad, Bangalore - Karnataka, Mysuru, Andra Pradesh also PAN India supply..